GENERAL INFORMATION | |
Primary Power |
PoE 802.3at/af / 9 - 24 VDC ± 20%, 550 mA maximum (reader current not included) |
Primary Host Communication |
Ethernet: 100Base-TX 256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications |
Secondary Host Communication |
BLE 5.2 |
Third Host Communication |
Wi-Fi IEEE 802.11ac 5GHz , or 2.4GHz/5GHz IEEE 802.11n 256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications |
Ethernet network connection |
Port 1:Ethernet: 100Base-TX Port 2: Ethernet: 100Base-TX (Configurable for Port Failover) |
RS-485 connection |
Port 1: Armatura RS-485 / OSDP V2.2 Port 2: Armatura RS-485 / OSDP V2.2 Port 3: Armatura RS-485 / OSDP V2.2 (Configurable for Port Redundancy dedicated on port 2 & 3) |
Number of Ports |
2*TCP/IP 3*RS-485 4*Wiegand |
Inputs |
4-state supervision, resistor values (5% tolerance), Normally open contact: use 1.2k, 2.2k. 4.7k or 10k/ Normally closed contact: use 1.2k, 2.2k. 4.7k or 10k/ Dedicated Panel Tamper IO Input* Dedicated Microchip Control Fire Alarm IO Input & REX Input for catastrophic situation |
Outputs |
4 relay, 4* Form-C with dry contacts |
Normally Open Contact Rating | 5A @ 30Vdc resistive |
Normally Closed Contact Rating |
5A @ 30Vdc resistive |
On-Board Monitor |
Size: 2.4", Resolution: 320*240, TFT Monitor Quickly view status of board, connected doors and for configuration information display |
On-Board Webserver |
Webserver for System Configuration and Management Dashboard for Controller Status Monitoring, Device Connection Status Monitoring & Configuration, Performance Status, server Primary Controller Setting, Network Status Monitoring & Setting, IP Access Filter, SSL / TLS Certificates Setting, Access Log Export, Controller Reset, Debug Status Monitoring, Operation Log Monitoring, User Management, Date & Time Setting, Daylight Saving Time Setting, NTP server Setting, General Status, Controller Information |
RFID Card Capacity | 400,000 (1:N) / 800,000 (1:1) |
Maximum RFID Card Number Length | Supports up to 512bits card number length |
Mobile Credential Capacity |
400,000 (1:N) (Bluetooth) 400,000 (1:N) (NFC) 400,000 (1:N) (Dynamic QR Code) |
Fingerprint Capacity |
50,000 (1:N) / 100,000 (1:1) |
Face Capacity | 5,000 (1:N) / 100,000 (1:1) |
Palm Capacity |
3,000 (1:N) / 5,000 (1:1) |
Transaction Buffer | 5,000,000 Events |
Access Level | 100,000 Levels |
On-Board Access Point Control | 4 access point on board |
On-Board Reader Support | 3 (OSDP over RS-485) or 4 (Wiegand) with on-board IO |
Maximum Access Point |
4 |
Maximum Readers | 8 |
Maximum Inputs | 384 (using Armatura AHEB-1602) |
Maximum Outputs |
385 (using Armatura AHEB-0216) |
Maximum IO Board | 24pcs (3*High Speed RS-485 communication) |
RFID / BIOMETRICS READER INTERFACE | |
Input Voltage | 12 -24 Vdc +/- 10% regulated, 500 mA maximum each reader |
Maximum Input Current | 12 - 24 Vdc +/- 10% regulated, 500 mA maximum each reader |
RS-485 Protocol | AES-128, OSDP Secure Channel |
OSDP Mode |
9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. 3rd Party reader: support OSDP V2.2 or above |
Wiegand | Read: support up to 128 bits / Write: Support 26 / 34 / 37 bit, and other customised card formats |
Tamper Input (Wiegand) | TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum |
Buzzer Output (Wiegand) | TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum |
LED Output (Wiegand) | TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum |
Data Inputs |
RS-485, OSDP and Wiegand standards supported. Maximum RS-485 /OSDP cable length: 3937ft. (1200m) Maximum Wiegand cable length: 328ft (100m) |
IO EXPANSION BOARD INTERFACE | |
RS-485 Protocol |
AES-128, OSDP V2 Secure Channel |
OSDP Mode | 9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. Maximum cable length: 2,000 ft. (609.6m) |
Data Inputs |
OSDP and Wiegand standards supported. Maximum cable length: 500 ft. (152m) |
CABLE REQUIREMENT | |
Power & Relays | One twisted pair, 18 to 16 AWG |
Ethernet |
CAT-5, minimum 330 ft. (100m) |
Ethernet Failover Port | CAT-5, minimum 330 ft. (100m) |
RS-485 Reader Port |
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG, Maximum cable length: 3937ft (1200m) |
RS-485 I/O Device Port |
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG, Maximum cable length: 3937ft (1200m) |
RS-485 Failover Port |
9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG, Maximum cable length: 3937ft (1200m) |
Wiegand Port | 20 AWG shielded Wiegand wire, 328ft. (100m) |
MECHANICAL | |
Dimensions | 4.8” W x 10.2” L x 2.5” H (122 x 260 x 62.5mm |
Weight |
30oz (830g) |
DIN Rail Mounting |
Supported DIN35 Rail Compatible with UTA89 Din Rail Adapter for screwing on switchgear (Sold Separately) Wall mount |
Housing Material | ABS-PC UL-94 V2 |
ENVIRONMENTAL | |
Operating Temperature | (-)22°F ~ 158°F (-30°C~70°C), Operating & Storage |
Operating Humidity |
0-95% RHNC |
Certification(s)* |
CE, FCC, UL, RoHS, UL294 Certification(s) |
Security Rating | Secure Data Storage in EAL 5+ Certified Crypto Chip |
SOFTWARE INTERFACE | |
TCP/IP Mode | Ethernet: 100Base-TX |
TCP/IP Protocol | NTP, SNMP V2 /V3, 802.1X, VLAN, SSH, MQTT, IPv4, IPv6, DNS, DDNS |
TCP/IP Encryption | Complies with TLS1.2, AES-256 end to end secure communication channel |
TCP/IP Communication | TCP/IP Communication |
Supported Software | Armatura One Security System |